Home > Products > Industry > Graphic Design > Prime Cor-X PP
Prime Cor-X PP

Prime COR-X PP product is a Polypropylene that is extruded into a corrugated configuration that provides good stiffness. The surface can be corona treated so that it will accept inks for silk screening and other types of printing. The flute configuration can run parallel to the extrusion direction or they can be oscillating. A polyspun laminate is also offered for this product.

Applications:

Ideal for applications such as:

  • Point of purchase displays
  • Signs
  • Mail totes
  • Automotive dunnage and other types of containers
  • Also offer a polyspun lamination that will provide the prime surface with a low COF for protecting delicate products
  • Special formulas provide Conductive (104-105 ohms/square) Anti-stat (109-1012 ohms/square) cm and VCI (rust preventative volatile corrosion inhibitor)

Processing

Prime Cor-X PE can be fabricated by drilling, routing, sawing, die cut and/or laser cutting. Mechanical fasteners or sonic welding work well for joining this product together.

Finishing

Prime Cor-X PP can be fabricated by drilling, routing, sawing, die cut and/or laser cutting. Mechanical fasteners and sonic welding work well for joining this product together.

Colors, Textures and Capabilities

Our Prime Cor-X PP comes in a wide variety of industry standard colors or it may be color matched to meet your specific requirements. The texture is smooth. This product is available in 3 to 12mm and up to 104" in width. 2 mm is available up to 80" wide. We offer a polyspun laminate to meet your specific requirements. Prime Cor-X PP is available in cut sheet as well as rolls.

prime-cor-x-pp.jpg
Prime Cor-X PE Very High High Average
Impact Strength     *
Low Temperature Impact Strength     *
Tensile Strength   *
Flexural Modulus   *
Heat Deflection Temperature   *
Property Test Method Value Unit
Specific Gravity D-1505 .906  
Melt Flow D-1238 .5 g/10min
Tensile @ Yield
 D-638 4,000 psi
Felxurual Modulus
 D-790 195,000 psi
Elongation @ Break
 D-638 >500 %
HDT @ 66 psi
 D-648 190 °F
Notched Izod @ 73 °F
 D-256 No Break
 ft-lb/in
Rockwell Hardness
 D-785 75 R Scale

Complies with 21 CFR 177.1520 and Mil-P-83668